Re: TUTO Esp Easy + Nextion + Domoticz
Publié : 28 nov. 2021, 16:44
@dokho
Comme d'habitude
: configesp
Comme d'habitude
: configesp
; avec plugin choisi, le nom de la version build et tous les paramètres déja renseignés : Nom, unité, ip static, ip controller...Je peux à la demande, si j'ai le temps, compiler une version sur mesure avec les paramètres ci dessous. Toutes les options sont paramétrables...
Code : Tout sélectionner
#ifndef ESPEASY_CUSTOM_H
#define ESPEASY_CUSTOM_H
#include <Arduino.h>
/*
To modify the stock configuration without changing the EspEasy.ino file :
1) rename this file to "Custom.h" (It is ignored by Git)
2) define your own settings below
3) define USE_CUSTOM_H as a build flags. ie : export PLATFORMIO_BUILD_FLAGS="'-DUSE_CUSTOM_H'"
*/
/*
#######################################################################################################
Your Own Default Settings
#######################################################################################################
You can basically ovveride ALL macro defined in ESPEasy.ino.
Don't forget to first #undef each existing #define that you add below.
But since this Custom.h is included before other defines are made, you don't have to undef a lot of defines.
Here are some examples:
*/
#ifdef BUILD_GIT
# undef BUILD_GIT
#endif // ifdef BUILD_GIT
#define BUILD_GIT "My Build: " __DATE__ " " __TIME__
#define DEFAULT_NAME "MyEspEasyDevice" // Enter your device friendly name
#define UNIT 0 // Unit Number
#define DEFAULT_DELAY 60 // Sleep Delay in seconds
// --- Wifi AP Mode (when your Wifi Network is not reachable) ----------------------------------------
#define DEFAULT_AP_IP 192, 168, 4, 1 // Enter IP address (comma separated) for AP (config) mode
#define DEFAULT_AP_SUBNET 255, 255, 255, 0 // Enter IP address (comma separated) for AP (config) mode
#define DEFAULT_AP_KEY "configesp" // Enter network WPA key for AP (config) mode
// --- Wifi Client Mode -----------------------------------------------------------------------------
#define DEFAULT_SSID "MyHomeSSID" // Enter your network SSID
#define DEFAULT_KEY "MySuperSecretPassword" // Enter your network WPA key
#define DEFAULT_SSID2 "" // Enter your fallback network SSID
#define DEFAULT_KEY2 "" // Enter your fallback network WPA key
#define DEFAULT_WIFI_INCLUDE_HIDDEN_SSID false // Allow to connect to hidden SSID APs
#define DEFAULT_USE_STATIC_IP false // (true|false) enabled or disabled static IP
#define DEFAULT_IP "192.168.0.50" // Enter your IP address
#define DEFAULT_DNS "192.168.0.1" // Enter your DNS
#define DEFAULT_GW "192.168.0.1" // Enter your Gateway
#define DEFAULT_SUBNET "255.255.255.0" // Enter your Subnet
#define DEFAULT_IPRANGE_LOW "0.0.0.0" // Allowed IP range to access webserver
#define DEFAULT_IPRANGE_HIGH "255.255.255.255" // Allowed IP range to access webserver
#define DEFAULT_IP_BLOCK_LEVEL 1 // 0: ALL_ALLOWED 1: LOCAL_SUBNET_ALLOWED 2:
// ONLY_IP_RANGE_ALLOWED
#define DEFAULT_ADMIN_USERNAME "admin"
#define DEFAULT_ADMIN_PASS ""
#define DEFAULT_WIFI_CONNECTION_TIMEOUT 10000 // minimum timeout in ms for WiFi to be connected.
#define DEFAULT_WIFI_FORCE_BG_MODE false // when set, only allow to connect in 802.11B or G mode (not N)
#define DEFAULT_WIFI_RESTART_WIFI_CONN_LOST false // Perform wifi off and on when connection was lost.
#define DEFAULT_ECO_MODE false // When set, make idle calls between executing tasks.
#define DEFAULT_WIFI_NONE_SLEEP false // When set, the wifi will be set to no longer sleep (more power
// used and need reboot to reset mode)
#define DEFAULT_GRATUITOUS_ARP false // When set, the node will send periodical gratuitous ARP
// packets to announce itself.
#define DEFAULT_TOLERANT_LAST_ARG_PARSE false // When set, the last argument of some commands will be parsed to the end of the line
// See: https://github.com/letscontrolit/ESPEasy/issues/2724
#define DEFAULT_SEND_TO_HTTP_ACK false // Wait for ack with SendToHttp command.
#define DEFAULT_AP_DONT_FORCE_SETUP false // Allow optional usage of Sensor without WIFI avaiable // When set you can use the Sensor in AP-Mode without beeing forced to /setup
#define DEFAULT_DONT_ALLOW_START_AP false // Usually the AP will be started when no WiFi is defined, or the defined one cannot be found. This flag may prevent it.
// --- Default Controller ------------------------------------------------------------------------------
#define DEFAULT_CONTROLLER false // true or false enabled or disabled, set 1st controller
// defaults
#define DEFAULT_CONTROLLER_ENABLED true // Enable default controller by default
#define DEFAULT_CONTROLLER_USER "" // Default controller user
#define DEFAULT_CONTROLLER_PASS "" // Default controller Password
// using a default template, you also need to set a DEFAULT PROTOCOL to a suitable MQTT protocol !
#define DEFAULT_PUB "sensors/espeasy/%sysname%/%tskname%/%valname%" // Enter your pub
#define DEFAULT_SUB "sensors/espeasy/%sysname%/#" // Enter your sub
#define DEFAULT_SERVER "192.168.0.8" // Enter your Server IP address
#define DEFAULT_SERVER_HOST "" // Server hostname
#define DEFAULT_SERVER_USEDNS false // true: Use hostname. false: use IP
#define DEFAULT_USE_EXTD_CONTROLLER_CREDENTIALS false // true: Allow longer user credentials for controllers
#define DEFAULT_PORT 8080 // Enter your Server port value
#define DEFAULT_PROTOCOL 0 // Protocol used for controller communications
// 0 = Stand-alone (no controller set)
// 1 = Domoticz HTTP
// 2 = Domoticz MQTT
// 3 = Nodo Telnet
// 4 = ThingSpeak
// 5 = Home Assistant (openHAB) MQTT
// 6 = PiDome MQTT
// 7 = EmonCMS
// 8 = Generic HTTP
// 9 = FHEM HTTP
#define DEFAULT_PIN_I2C_SDA 4
#define DEFAULT_PIN_I2C_SCL 5
#define DEFAULT_I2C_CLOCK_SPEED 400000 // Use 100 kHz if working with old I2C chips
#define USE_I2C_DEVICE_SCAN true
#define DEFAULT_SPI 0 //0=disabled 1=enabled and for ESP32 there is option 2 =HSPI
#define DEFAULT_PIN_STATUS_LED (-1)
#define DEFAULT_PIN_STATUS_LED_INVERSED true
#define DEFAULT_PIN_RESET_BUTTON (-1)
#define DEFAULT_USE_RULES false // (true|false) Enable Rules?
#define DEFAULT_RULES_OLDENGINE true
#define DEFAULT_MQTT_RETAIN false // (true|false) Retain MQTT messages?
#define DEFAULT_MQTT_DELAY 100 // Time in milliseconds to retain MQTT messages
#define DEFAULT_MQTT_LWT_TOPIC "" // Default lwt topic
#define DEFAULT_MQTT_LWT_CONNECT_MESSAGE "Connected" // Default lwt message
#define DEFAULT_MQTT_LWT_DISCONNECT_MESSAGE "Connection Lost" // Default lwt message
#define DEFAULT_MQTT_USE_UNITNAME_AS_CLIENTID 0
#define DEFAULT_USE_NTP false // (true|false) Use NTP Server
#define DEFAULT_NTP_HOST "" // NTP Server Hostname
#define DEFAULT_TIME_ZONE 0 // Time Offset (in minutes)
#define DEFAULT_USE_DST false // (true|false) Use Daily Time Saving
#define DEFAULT_LATITUDE 0.0f // Default Latitude
#define DEFAULT_LONGITUDE 0.0f // Default Longitude
#define DEFAULT_SYSLOG_IP "" // Syslog IP Address
#define DEFAULT_SYSLOG_LEVEL 0 // Syslog Log Level
#define DEFAULT_SERIAL_LOG_LEVEL LOG_LEVEL_INFO // Serial Log Level
#define DEFAULT_WEB_LOG_LEVEL LOG_LEVEL_INFO // Web Log Level
#define DEFAULT_SD_LOG_LEVEL 0 // SD Card Log Level
#define DEFAULT_USE_SD_LOG false // (true|false) Enable Logging to the SD card
#define DEFAULT_USE_SERIAL true // (true|false) Enable Logging to the Serial Port
#define DEFAULT_SERIAL_BAUD 115200 // Serial Port Baud Rate
#define DEFAULT_SYSLOG_FACILITY 0 // kern
#define DEFAULT_SYNC_UDP_PORT 0 // Used for ESPEasy p2p. (IANA registered port: 8266)
#define BUILD_NO_DEBUG
// Special SSID/key setup only to be used in custom builds.
// Deployment SSID will be used only when the configured SSIDs are not reachable and/or no credentials are set.
// This to make deployment of large number of nodes easier
#define CUSTOM_DEPLOYMENT_SSID "" // Enter SSID not shown in UI, to be used on custom builds to ease deployment
#define CUSTOM_DEPLOYMENT_KEY "" // Enter key not shown in UI, to be used on custom builds to ease deployment
#define CUSTOM_SUPPORT_SSID "" // Enter SSID not shown in UI, to be used on custom builds to ease support
#define CUSTOM_SUPPORT_KEY "" // Enter key not shown in UI, to be used on custom builds to ease support
// Emergency fallback SSID will only be attempted in the first 10 minutes after reboot.
// When found, the unit will connect to it and depending on the built in flag, it will either just connect to it, or clear set credentials.
// Use case: User connects to a public AP which does need to agree on an agreement page for the rules of conduct (e.g. open APs)
// This is seen as a valid connection, so the unit will not reconnect to another node and thus becomes inaccessible.
#define CUSTOM_EMERGENCY_FALLBACK_SSID "" // Enter SSID not shown in UI, to be used to regain access to the node
#define CUSTOM_EMERGENCY_FALLBACK_KEY "" // Enter key not shown in UI, to be used to regain access to the node
#define CUSTOM_EMERGENCY_FALLBACK_RESET_CREDENTIALS false
#define CUSTOM_EMERGENCY_FALLBACK_START_AP false
#define CUSTOM_EMERGENCY_FALLBACK_ALLOW_MINUTES_UPTIME 10
#define USES_SSDP
#define USE_EXT_RTC // Support for external RTC clock modules like PCF8563/PCF8523/DS3231/DS1307
// #define USE_SETTINGS_ARCHIVE
// #define FEATURE_I2CMULTIPLEXER
// #define USE_TRIGONOMETRIC_FUNCTIONS_RULES
/*
#######################################################################################################
Defining web interface
#######################################################################################################
*/
#define MENU_INDEX_MAIN_VISIBLE true
/*
#define MENU_INDEX_CONFIG_VISIBLE false
#define MENU_INDEX_CONTROLLERS_VISIBLE false
#define MENU_INDEX_HARDWARE_VISIBLE false
#define MENU_INDEX_DEVICES_VISIBLE false
#define MENU_INDEX_RULES_VISIBLE false
#define MENU_INDEX_NOTIFICATIONS_VISIBLE false
#define MENU_INDEX_TOOLS_VISIBLE false
*/
#define MAIN_PAGE_SHOW_SYSINFO_BUTTON true
#define MAIN_PAGE_SHOW_WiFi_SETUP_BUTTON true
#define MAIN_PAGE_SHOW_BASIC_INFO_NOT_LOGGED_IN false
#define MAIN_PAGE_SHOW_NODE_LIST_BUILD true
#define MAIN_PAGE_SHOW_NODE_LIST_TYPE true
#define SETUP_PAGE_SHOW_CONFIG_BUTTON true
//#define WEBPAGE_TEMPLATE_HIDE_HELP_BUTTON
/*
#######################################################################################################
CSS / template
#######################################################################################################
*/
/*
#define WEBPAGE_TEMPLATE_DEFAULT_HEADER "<header class='headermenu'><h1>ESP Easy Mega: {{title}}</h1><BR>"
#define WEBPAGE_TEMPLATE_DEFAULT_FOOTER "<footer><br><h6>Powered by <a href='http://www.letscontrolit.com' style='font-size: 15px; text-decoration: none'>Let's Control It</a> community</h6></footer></body></html>"
#define WEBPAGE_TEMPLATE_AP_HEADER "<body><header class='apheader'><h1>Welcome to ESP Easy Mega AP</h1>"
#define WEBPAGE_TEMPLATE_HIDE_HELP_BUTTON
*/
// Embed Custom CSS in Custom.h:
/*
#define WEBSERVER_EMBED_CUSTOM_CSS
static const char DATA_ESPEASY_DEFAULT_MIN_CSS[] PROGMEM = {
...
,0};
*/
/*
#######################################################################################################
Special settings (rendering settings incompatible with other builds)
#######################################################################################################
*/
// #define USE_NON_STANDARD_24_TASKS
/*
#######################################################################################################
Your Own selection of plugins and controllers
#######################################################################################################
*/
#define CONTROLLER_SET_NONE
#define NOTIFIER_SET_NONE
#define PLUGIN_SET_NONE
/*
#######################################################################################################
########### Plugins
#######################################################################################################
*/
// #define USE_SERVO
// #define USES_P001 // Switch
// #define USES_P002 // ADC
// #define USES_P003 // Pulse
// #define USES_P004 // Dallas
// #define USES_P005 // DHT
// #define USES_P006 // BMP085
// #define USES_P007 // PCF8591
// #define USES_P008 // RFID
// #define USES_P009 // MCP
// #define USES_P010 // BH1750
// #define USES_P011 // PME
// #define USES_P012 // LCD
// #define USES_P013 // HCSR04
// #define USES_P014 // SI7021
// #define USES_P015 // TSL2561
// #define USES_P017 // PN532
// #define USES_P018 // Dust
// #define USES_P019 // PCF8574
// #define USES_P020 // Ser2Net
// #define USES_P021 // Level
// #define USES_P022 // PCA9685
// #define USES_P023 // OLED
// #define USES_P024 // MLX90614
// #define USES_P025 // ADS1115
// #define USES_P026 // SysInfo
// #define USES_P027 // INA219
// #define USES_P028 // BME280
// #define USES_P029 // Output
// #define USES_P031 // SHT1X
// #define USES_P032 // MS5611
// #define USES_P033 // Dummy
// #define USES_P034 // DHT12
// #define USES_P036 // FrameOLED
// #define USES_P037 // MQTTImport
// #define USES_P038 // NeoPixel
// #define USES_P039 // Environment - Thermocouple
// #define USES_P040 // RFID - ID12LA/RDM6300
// #define USES_P041 // NeoClock
// #define USES_P042 // Candle
// #define USES_P043 // ClkOutput
// #define USES_P044 // P1WifiGateway
// #define USES_P045 // MPU6050
// #define USES_P046 // VentusW266
// #define USES_P047 // I2C_soil_misture
// #define USES_P048 // Motoshield_v2
// #define USES_P049 // MHZ19
// #define USES_P050 // TCS34725 RGB Color Sensor with IR filter and White LED
// #define USES_P051 // AM2320
// #define USES_P052 // SenseAir
// #define USES_P053 // PMSx003
// #define USES_P054 // DMX512
// #define USES_P055 // Chiming
// #define USES_P056 // SDS011-Dust
// #define USES_P057 // HT16K33_LED
// #define USES_P058 // HT16K33_KeyPad
// #define USES_P059 // Encoder
// #define USES_P060 // MCP3221
// #define USES_P061 // Keypad
// #define USES_P062 // MPR121_KeyPad
// #define USES_P063 // TTP229_KeyPad
// #define USES_P064 // APDS9960 Gesture
// #define USES_P065 // DRF0299
// #define USES_P066 // VEML6040
// #define USES_P067 // HX711_Load_Cell
// #define USES_P068 // SHT3x
// #define USES_P069 // LM75A
// #define USES_P070 // NeoPixel_Clock
// #define USES_P071 // Kamstrup401
// #define USES_P072 // HDC1080
// #define USES_P073 // 7DG
// #define USES_P074 // TSL2561
// #define USES_P075 // Nextion
// #define USES_P076 // HWL8012 in POW r1
// #define USES_P077 // CSE7766 in POW R2
// #define USES_P078 // Eastron Modbus Energy meters
// #define USES_P079 // Wemos Motoshield
// #define USES_P080 // iButton Sensor DS1990A
// #define USES_P081 // Cron
// #define USES_P082 // GPS
// #define USES_P083 // SGP30
// #define USES_P084 // VEML6070
// #define USES_P085 // AcuDC24x
// #define USES_P086 // Receiving values according Homie convention. Works together with C014 Homie controller
// #define USES_P087 // Serial Proxy
// #define USES_P088 // HeatpumpIR
// #define USES_P089 // Ping
// #define USES_P090 // CCS811
// #define USES_P091 // SerSwitch
// #define USES_P092 // DLbus
// #define USES_P093 // MitsubishiHP
// #define USES_P094 // CULReader
// #define USES_P095 // ILI9341
// #define USES_P096 // eInk
// #define USES_P097 // ESP32Touch
// #define USES_P098 //
// #define USES_P099 // XPT2046 touchscreen
// #define USES_P100 // DS2423 counter
// #define USES_P101 // WakeOnLan
// #define USES_P102 // PZEM004Tv3
// #define USES_P103 // Atlas Scientific EZO Sensors (pH, ORP, EZO, DO)
// #define USES_P104 // MAX7219 dotmatrix
// #define USES_P105 // AHT10/20/21
// #define USES_P106 // BME680
// #define USES_P107 // Si1145
// #define USES_P109 // ThermoOLED
// #define USES_P110 // VL53L0X Time of Flight sensor
// #define USES_P111 // RF522 RFID reader
// #define USES_P112 // AS7265x
// #define USES_P113 // VL53L1X ToF
// #define USES_P114 // VEML6075
// #define USES_P115 // MAX1704x
// #define USES_P119 // ITG3205 Gyro
// #define USES_P120 // ADXL345 Acceleration / Gravity
// Special plugins needing IR library
// #define USES_P016 // IR
// #define P016_SEND_IR_TO_CONTROLLER false //IF true then the JSON replay solution is transmited back to the condroller.
// #define USES_P035 // IRTX
// #define P016_P035_Extended_AC // The following define is needed for extended decoding of A/C Messages and or using standardised
//common arguments for controlling all deeply supported A/C units
// #define P016_P035_USE_RAW_RAW2 //Use the RAW and RAW2 encodings, disabling it saves 3.7Kb
// #define USES_P088 // Heatpump IR
// #define USES_P108 // DDS238-x ZN Modbus energy meters
/*
#######################################################################################################
########### Controllers
#######################################################################################################
*/
// #define USES_C001 // Domoticz HTTP
// #define USES_C002 // Domoticz MQTT
// #define USES_C003 // Nodo telnet
// #define USES_C004 // ThingSpeak
// #define USES_C005 // Home Assistant (openHAB) MQTT
// #define USES_C006 // PiDome MQTT
// #define USES_C007 // Emoncms
// #define USES_C008 // Generic HTTP
// #define USES_C009 // FHEM HTTP
// #define USES_C010 // Generic UDP
// #define USES_C011 // Generic HTTP Advanced
// #define USES_C012 // Blynk HTTP
// #define USES_C013 // ESPEasy P2P network
// #define USES_C014 // homie 3 & 4dev MQTT
// #define USES_C015 // Blynk
// #define USES_C016 // Cache controller
// #define USES_C017 // Zabbix
// #define USES_C018 // TTN/RN2483
/*
#######################################################################################################
########### Notifiers
#######################################################################################################
*/
// #define USES_N001 // Email
// #define USES_N002 // Buzzer
#endif // ESPEASY_CUSTOM_H
