Forum Domoticz en français

Code : Tout sélectionner

commandArray = {}

-- loop through all the changed devices
for deviceName,deviceValue in pairs(devicechanged) do
    print ("Device based event fired on '"..deviceName.."', value '"..tostring(deviceValue).."'")
    print('otherdevices[\'Nuit\'] '..otherdevices['Nuit'])
    if (deviceName=='Nuit') then
    	print ("Device "..deviceName.." detected")
        if deviceValue == "On" then
            	print("Nuit is On")
            	print('otherdevices[\'Store Terrasse\'] '..otherdevices['Store Terrasse'])
		commandArray['Store Terrasse']='Off'
        end
    end
print ("End event fired on "..deviceName)
end

return commandArray