plantage DZ

[Chrominator]

/etc/init.d/domoticz.sh est bien celui qui est censé démarrer domoticz.

[vulbas]

ok, j'ai reussi à modifier le fichier, j'ai du changer les droits sinon je n'y avais pas acces. maintenant je vois bien le fichier domoticz.txt
plus qu'à attendre que ça plante
merci pour ton aide c'est top

edit,
bon voilà. plus acces à DZ

Code : Tout sélectionner

pi@raspberrypi:~ $ less /tmp/domoticz.txt
2021-08-29 00:25:10.162  Status: Domoticz V2021.1 (build 13482) (c)2012-2021 GizMoCuz
2021-08-29 00:25:10.162  Status: Build Hash: e8eb6e363, Date: 2021-08-24 17:14:18
2021-08-29 00:25:10.163  Status: Startup Path: /home/pi/domoticz/
2021-08-29 00:25:11.285  Sunrise: 07:04:00 SunSet: 20:40:00
2021-08-29 00:25:11.285  Day length: 13:35:00 Sun at south: 13:52:00
2021-08-29 00:25:11.285  Civil twilight start: 06:31:00 Civil twilight end: 21:12:00
2021-08-29 00:25:11.285  Nautical twilight start: 05:51:00 Nautical twilight end: 21:53:00
2021-08-29 00:25:11.285  Astronomical twilight start: 05:07:00 Astronomical twilight end: 22:37:00
2021-08-29 00:25:12.127  Status: PluginSystem: Started, Python version '3.7.3'.
2021-08-29 00:25:12.168  Active notification Subsystems: email, pushbullet (2/13)
2021-08-29 00:25:12.209  Status: WebServer(HTTP) started on address: :: with port 8080
2021-08-29 00:25:12.337  Status: WebServer(SSL) started on address: :: with port 443
2021-08-29 00:25:12.351  Status: Proxymanager started.
2021-08-29 00:25:12.384  Status: Camera: settings (re)loaded
2021-08-29 00:25:12.395  Starting shared server on: :::6554
2021-08-29 00:25:12.395  Status: TCPServer: shared server started...
2021-08-29 00:25:12.401  Status: RxQueue: queue worker started...
2021-08-29 00:25:12.484  Proxy: Error, reconnecting (Connection refused)
2021-08-29 00:25:14.403  Status: EDF: Teleinfo device uses serial port: /dev/ttyUSB-EDF at 1200 bauds
2021-08-29 00:25:14.412  Status: EDF: CRC checks will be performed on incoming data
2021-08-29 00:25:14.415  Status: switch TV presence: Worker started...
2021-08-29 00:25:14.415  Status: controle batterie zwave: (controle batterie zwave) Entering work loop.
2021-08-29 00:25:14.416  controle batterie zwave hardware started.
2021-08-29 00:25:14.416  Status: controle batterie zwave: (controle batterie zwave) Started.
2021-08-29 00:25:14.417  Status: Harmony: Worker thread started...
2021-08-29 00:25:14.451  Status: hardware pi: System: Raspberry Pi
2021-08-29 00:25:14.498  Status: hardware pi: Hardware Monitor: Started (OStype Raspberry Pi Linux)
2021-08-29 00:25:14.498  Status: hue bridge: Worker started...
2021-08-29 00:25:14.498  Status:  clim: ( clim) Entering work loop.
2021-08-29 00:25:14.498   clim hardware started.
2021-08-29 00:25:14.498  Status:  clim: ( clim) Started.
2021-08-29 00:25:14.499  Status: NotificationSystem: thread started...
2021-08-29 00:25:14.500  Status: EventSystem: reset all events...
2021-08-29 00:25:14.521  Status: EventSystem: reset all device statuses...
2021-08-29 00:25:14.583  Status: EDF: CRC check mode set to 1
2021-08-29 00:25:14.605  Status: rflink-433: Using serial port: /dev/ttyUSB-RFX433
2021-08-29 00:25:14.859  Status: controle batterie zwave: (controle batterie zwave) Initialized version 0.5.2, author 'logread'
2021-08-29 00:25:14.907  Status: Z-wave: using config in: /home/pi/domoticz/Config/
2021-08-29 00:25:14.956  Status: PluginSystem: 2 plugins started.
2021-08-29 00:25:15.405  Status:  clim: ( clim) Initialized version 3.0.0, author 'tixi'
2021-08-29 00:25:15.581  controle batterie zwave: (controle batterie zwave) Debug logging mask set to: NONE
2021-08-29 00:25:15.582  controle batterie zwave: (controle batterie zwave) Setting battery level to full if greater or equal than 75 percent
2021-08-29 00:25:15.582  controle batterie zwave: (controle batterie zwave) Setting battery level to normal if greater or equal than 50 percent
2021-08-29 00:25:15.582  controle batterie zwave: (controle batterie zwave) Setting battery level to empty if less or equal than 25 percent
2021-08-29 00:25:15.584  controle batterie zwave: (controle batterie zwave) Using polling interval of 60 minutes
2021-08-29 00:25:15.593   clim: ( clim) Debug logging mask set to: NONE
2021-08-29 00:25:15.709  Status: Z-wave: Starting...
2021-08-29 00:25:15.709  Status: Z-wave: Version: 1.6-1911-gc6a420ef
2021-08-29 00:25:16.466  hue bridge: Color Switch (Hue color lamp 1)
2021-08-29 00:25:16.546  hue bridge: Color Switch (Hue color go droit)
2021-08-29 00:25:16.609  hue bridge: Color Switch (Hue go gauche)
2021-08-29 00:25:16.638  hardware pi: Temp (Internal Temperature)
2021-08-29 00:25:16.673  hue bridge: Color Switch (Hue color spot centre)
2021-08-29 00:25:16.700  hue bridge: Color Switch (Hue color spot droit)
2021-08-29 00:25:16.721  hue bridge: Color Switch (Hue color spot gauche)
2021-08-29 00:25:16.740  hue bridge: Color Switch (Hue color lamp 2)
2021-08-29 00:25:16.741  Status: Python EventSystem: Initializing event module.
2021-08-29 00:25:16.743  Status: EventSystem: Started
2021-08-29 00:25:16.744  Status: EventSystem: Queue thread started...
2021-08-29 00:25:16.782  EDF: General/kWh (Teleinfo kWh Heures Creuses)

si tu vois un truc la dedans qui pourrait poser probleme... tout me semble ok

j'ai tenté un

Code : Tout sélectionner

pi@raspberrypi:~ $ sudo service domoticz.sh status
● domoticz.service - LSB: Home Automation System
   Loaded: loaded (/etc/init.d/domoticz.sh; generated)
   Active: active (exited) since Sun 2021-08-29 00:25:10 CEST; 8min ago
     Docs: man:systemd-sysv-generator(8)
  Process: 608 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SUCCESS)

Aug 29 00:24:30 raspberrypi systemd[1]: Starting LSB: Home Automation System...
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: 2021-08-29 00:25:10.162  Status: Domoticz V2021.1 (build 13482) (c)2012-2021 GizMoCuz
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: 2021-08-29 00:25:10.162  Status: Build Hash: e8eb6e363, Date: 2021-08-24 17:14:18
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: 2021-08-29 00:25:10.163  Status: Startup Path: /home/pi/domoticz/
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: domoticz: Domoticz is starting up....
Aug 29 00:25:10 raspberrypi domoticz[620]: Domoticz is starting up....
Aug 29 00:25:10 raspberrypi domoticz[624]: Domoticz running...
Aug 29 00:25:10 raspberrypi systemd[1]: Started LSB: Home Automation System.
pi@raspberrypi:~ $

mais je ne peux commander aucun appareil via des boutons ou la google home par exempple. DZ est bien HS

[vulbas]

je viens donner des news....... j'avais oublié que j'avais installé le plugin tuya..... je l'ai viré et depuis zero probleme...